Damage Analysis of Hydraulic Bucket Cylinder on Excavator Komatsu CP-200 At PT. Wiratako Mitra Mulia
Abstract
PT. Wiratako Mitra Mulia is a company engaged in asphalt construction and road repair. At this time PT. Wiratako Mitra Mulia uses several heavy equipment to facilitate the work process, one of the heavy equipment used by PT. Wiratako Mitra Mulia is an excavator which is used for the process of dredging soil, moving materials and leveling the ground. From this, there are several obstacles or problems that occur in the excavator, such as damage to the bucket hydraulic cylinder, in which the bucket hydraulic cylinder has an oil leak, cylinder piston damage and seal leakage, therefore proper and scheduled maintenance is needed so that the damage that occurs to the hydraulic cylinder of the bucket excavator can be minimized so that the work process can run smoothly and do not experience any problems. Therefore, daily, weekly, monthly and yearly maintenance is required. For daily maintenance carried out every day by checking lubricants and performing services, for weekly maintenance inspections are carried out every 60 working hours. For monthly maintenance it is done every 250 working hours and for annual maintenance it is done every 2500 working hours.
Downloads
References
Lestari, I. K. and Destiningsih, R. 2021. ‘Peta Perkembangan Konstruksi di Kota Magelang’, Gorontalo Deleopment Review, 4(1), pp. 23–36.
Putra, R. S. 2011. Pusat Penelitian Dan Pelatihan Ilmu Konstruksi Dan Teknologi Bangunan Di Yogyakarta (Doctoral dissertation, UAJY).
Mulia, P. W. M. 2016. Analisis Persediaan Bahan Material Aspal Menggunakan Alat Stone Crusher dengan Metode RCCP.
Putra, G., & Zikrullah, J. 2022. Pengukuran Beban Kerja Operator Menggunakan Metode 10 Denyut di PT. Wirataco. Jurnal Serambi Engineering, 7(2).
Akbar, M. 2019. Analisa Numerik Defleksi Pada Rood Bucket Di Sistem Hidrolik Excavator Hitachi Ex 200 (Doctoral dissertation).
. Zarkasyi, A. et al. 2019. Analisa Kerusakan Silinder Hidrolik Pada Excavator Hitachi Ex 200 Lc Dengan Metode Fishbone Di PT . Alhas Jaya Group’, Jurnal Mesin Sains Terapan, 3(1), pp. 1–4.
Hidayahtullah, A. R. 2020. Perbaikan Hydraulic Pump Wheel Loaderkomatsu 350-3 (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
. Firdaus, A., Turmizi, T., & Ariefin, A. 2017. Perencanaan Perawatan Preventive dan Corrective Pada Komponen Sistem Hidrolik Excavator Komatsu PC200-8. Jurnal Mesin Sains Terapan, 1(1), 25-31.
Bhirawa, W. T. 2021. Sistem Hidrolik Pada Mesin industri. Jurnal Teknologi Industri, vol 6.
