Analysis of the Causes of Failure and Damage to Conveyor Scraper for Transporting Oil Palm Bunches at PT. Socfindo Seunagan Plantation using the FMEA Method (Failure Modes Effect Analysis)
Abstract
PT. Socfindo Kebun seunagan is a company engaged in the plantation and processing of Fresh Fruit Bunches (FFB) into Crude Palm Oil (CPO). Fresh Fruit Bunches before processing, are first transported using a conveyor to be processed into oil (CPO) from a sterilizer. Based on the analysis of damage and failure that often occurs in scrapper conveyor parts, damage is hampered by the productivity of the company. The purpose of this study is to analyze the causes of failure and damage that occur on the scrapper conveyor by calculating the RPN (Risk Priority Number) value of each failure and damage that occurs to determine maintenance actions that need to be followed up. The results of the analysis showed that there were failures and potential damage to the scrapper conveyor, including the release of the scrapper conveyor chain connecting of 135 RPN, the wear of the scrapper conveyor chain of 40 RPN, and the rupture of the bearing of 56 RPN. Connecting the scrapper conveyor chain is more often damaged than other parts, so monitoring and repair are prioritized. Overall, the factors causing damage and failure are caused by lack of routine maintenance so that they are damaged.
Downloads
References
PT. Socfindo (persero), "Profil PT. Socfindo," 2022. [Online]. Available: http:/www.socfindo.co.id. [Accessed Juli 2022].
Y. Hisprastin and I. Musfiroh, "Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang Sering Digunakan dalam Manajemen Risiko Mutu di Industri," Maj. Farmasetika, vol. 6 (1), pp. 1-9, 2021.
D. Cahya, Perawatan dan Perbaikan Pada Bagian Drag chain Conveyor PT. Semen Baturaja Persero Tbk., Baturaja, 2020.
K. Husein, Meminimasi Cacat Produk Bogie Tipe S2E-9C menggunakan Metode Statistical Quality Control (SQC) Dan Failure Mode Effect Analysis (FMEA) Pada Pt Barata Indonesia, 2021.
B. Cahyabuana and A. Pribadi, Konsistensi Penggunaan Metode FMEA (Failure Mode Effects and Analysis) terhadap Penilaian Risiko Teknologi Informasi (Studi kasus: Bank XYZ), Institut Teknologi Sepuluh Nopember, 2015.
I. Nurdiansah, M. Marno and A. Santosa, "Analisa Kerusakan Mesin Bubut Al Pin 350 Dengan Metode Failure Mode and Effect Analysis (FMEA)," Jurnal Ilmiah Wahana Pendidikan, vol. 8(1), pp. 704-708, 2022.
R. Bilhamullah and G. Putra, "Analisa Kegagalan Alat Angkut Scraper Incline Fibre Menggunakan Failure Mode and Effect Analysis (FMEA) di PT Ujong Neubok Dalam," Jurnal Vokasi Teknologi Industri, vol. 4(1), pp. 35-42, 2022.
E. N. Hayati, "Supply Chain Management (SCM) Dan Logistic Management," Jurnal Ilmiah Dinamika Teknik, vol. 8(1), pp. 25-34, 2014.
J. Heizer and B. Render, Manajemen Operasi, Jakarta: Salemba Empat, 2010.
M. B. Rahmandika, "Identifikasi Potensi Bahaya K3 menggunakan Metode Failure Mode Effect Analysis dan Usulan Pencegahan Di UMKM Power Shuttlecock," Journal of Industrial View, vol. 2(2), pp. 12-19, 2020.
Dyadem, Guidelines for Failure Mode and Effects Analysisfor Automotive, Aerospace and General Manufacturing Industries, New York washington D.C: CRC Press, 2009.
Sugiyono, Metode penelitian Bisnis (Pendekata.n Kuantitatif, Kualitatif clan R&D), Bandung: Alfa&ta, 2010.
M. B. Anthony, "Analisis Penyebab Kerusakan Hot Rooler Table dengan menggunakan metode Failure Mode and Effect Analysis (FMEA). ," Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 4(1), pp. 1-8, 2018.
