Screw Press Machine Damage Analysis with Failure Mode and Effect Analysis (FMEA) Method in Palm Oil Factory PT. Socfindo Seunagan

  • Abdul Rauf Universitas Teuku Umar
  • Sulaiman Ali Universitas Teuku Umar
  • Joli Supardi Universitas Teuku Umar
Keywords: Failure Mode, Effect Analysis, Risk Priority Number, Flanned Maintenance

Abstract

PT. Socfindo is an industry engaged in the processing of Fresh Palm Fruit Bunches into crude palm oil or CPO (Crude Palm Oil). the day in the morning, therefore it is necessary to identify the presence of machine components that are prone to damage (critical components) and special actions are needed to take special actions against critical parts on the machine, by practicing the Predictive Maintenance Program or prevention. Simulation techniques, often known as Monte Carlo simulations, estimate reliability using random sampling of scenarios. Failure mode and effect analysis (FMEA) is defined as a process used to determine the actions that should be taken to ensure that each physical item or system can run properly according to the intended use by the user. Based on the information obtained, the RPN value of the Rubber Coupling Bush is 18, the RPN value of the Worm Screw is 126, the RPN value of the Press Cage is 72, the Adjusting Cone RPN value is 108, the Tie Rod Nut RPN value is 15, the Drive Shaft RPN value is 168, the Bearing RPN value is 12, the Motor Base RPN value is 15.

Downloads

Download data is not yet available.

References

Anleitner, M. A., 2010. The Power of Deduction: Failure Modes and Effects Analysis for Design. United States of America: Quality Press.

Dyadem. 2009. Guidelines for Failure Mode and Effects Analysisfor Automotive, Aerospace and General Manufacturing Industries. New York washington D.C: CRC Press.

Hasballah, T., dan E. W. B., Siahaan. 2018. Pengaruh Tekanan Screw Press Pada Proses Pengepresan Daging Buah Menjadi Crude Palm Oil. Jurnal Darma Agung. Vol. 26, No. 1, hal. 722-729.

Nasution, M, Bakhori, A & Novarika, W 2021, ‘MANFAAT PERLUNYA MANAJEMEN PERAWATAN UNTUK BENGKEL MAUPUN INDUSTRI’, Cetak) Buletin Utama Teknik, vol. 16, Online, no. 3, p. 2021.

Puspitasari, NB, Arianie, GP & Wicaksono, PA 2017, ‘ANALISIS IDENTIFIKASI MASALAH DENGAN MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN RISK PRIORITY NUMBER (RPN) PADA SUB ASSEMBLY LINE (Studi Kasus : PT. Toyota Motor Manufacturing Indonesia)’, J@ti Undip: Jurnal Teknik Industri, vol. 12, no. 2, pp. 77–84, viewed 16 February 2022,

Santoso, R., dkk., 2021. Optimalisasi Perawatan Mesin Press Dengan Metode Failure Mode Effect Analysis (FMEA). Jambura Industrial Review. Volume 1, Nomor 1, hal. 1-6.

Published
2022-04-26
How to Cite
[1]
A. Rauf, S. Ali, and J. Supardi, “Screw Press Machine Damage Analysis with Failure Mode and Effect Analysis (FMEA) Method in Palm Oil Factory PT. Socfindo Seunagan”, JI, vol. 7, no. 1, pp. 12-18, Apr. 2022.