Strength Analysis Plastic Deformed Centrifugal Pumps

  • Edi Saputra Politeknik Negeri Lhokseumawe
  • Nuzuli Fitriadi Politeknik Aceh Selatan

Abstract

The G-3503 centrifugal pump functions to flow Diethanolamine fluid with a viscosity of 380 Cp which functions to reduce H2S and CO2 levels in natural gas. When operating, the pump shaft experiences a torque load which causes the shaft to be twisted by 80. From the exact and finite element analysis results, the shear stress that occurs on the shaft is greater than the shear stress of the shaft material. Thus, the shaft is deformed plastically. The shear stress that occurs is 164 MPa

Downloads

Download data is not yet available.

References

Sukanto J. & Sarjito J., Analisa Kekuatan Puntir dan Kekuatan lentur Putar Poros Baja ST 60 Sebagai Aplikasi Perancangan Bahan Poros Baling-Baling Kapal. Jurnal ISSN 1829-8370, Undip Semarang, pp. 42-51

Sularso., Haruo Tahara., 2000., Pompa & Kompresor: Pemilihan, Pemakaian, dan Pemeliharaan. Jakarta: Pradnya Paramita.

Supriyono & Bintang Adjiantoro., 2010. Analisa Kegagalan Poros Pompa Air Laut Pada Unit PLTU. ISSN 1410-9093, Universitas Gunadarma. pp. 149-158.

Val S, Lobano & Robert R, Ross., 1985., Centrifugal Pumps Design & Application. Printed in the United States of America by Butterworth-Heinemann.

Taufiq E R., Soeweifi & Totok Y. 2012. Analisa Perambatan Retak Pada Bagian Poros KM Surya Tulus Akibat Torsi Dengan Metode Elemen Hingga. Jurnal ISSN 2301-9271, ITS Surabaya, pp. 109-112

Girdhar, P., Moniz, O., 2011., Practical Centrifugal Pump. Printed and bound in the Netherlands by Integra Software Services.

James M G., Barry J., 1976., Mechanis of Materials. Printed in the United States of America by Cengage Learning.

https://www.makeitfrom.com/material-properties/AISI-304-1.4301-S30400-Stainless-Steel. Accessed on 12 february 2018.

https://www.google.co.id/amp/s/pipestress.wordpress.com/2011/05/14/teori-kegagalan-failure-theory/amp/. Accessed on 12 february 2018.

Published
2021-03-03
How to Cite
[1]
E. Saputra and N. Fitriadi, “Strength Analysis Plastic Deformed Centrifugal Pumps”, JI, vol. 6, no. 1, pp. 46-51, Mar. 2021.

Most read articles by the same author(s)