Identification of Screw Press Machine Damage Using Failure Mode And Effect Analysis Method in PT. Socfinfo Seunagan

  • Sarbeni Universitas Teuku Umar
  • Arie Saputra Prodi Teknik Industri Universitas Teuku Umar
Keywords: Screw Press FMEA Maintenance

Abstract

The palm oil mill (PKS) is a place that serves as a place to process fresh fruit bunches (FFB) of palm oil into crude palm oil (CPO), palm kernels (kernels), fiber and palm shells. The processing of palm fruit into palm oil is carried out using production machines, one of which is a Screw Press machine [1]. In a factory, there are usually problems, one of which is at the Screw Press engine station. The Screw Press machine is one of the most important machines in palm oil mills. This study aims to identify damage and failures that occur in screw press machines. This study uses the failure mode and effect analysis (FMEA) method, which is to find out or observe the level of failure and damage that occurs in the screw press machine so that it can minimize failures / damage that occur. Based on the results of the study, there were 9 failures and risks that occurred in the screw press machine components, with the highest Risk Priority Number found in the Special Bearing components with a value of

  1. While the lowest value is in the Spur Gear component, which is with a value of 24. From these results, it can be concluded that the Special Bearing component is a priority / priority for repairs.

Downloads

Download data is not yet available.

References

Ir. T. Hasnallah, Enzo W.,B., Siahan, 2018, Pengaruh Tekanan Screw Press pada proses pengepresan Daging Buah menjadi Crude Palm Oil, JURNAL DARMA AGUNG, 1, XXVI dan 722-729.

Siregar, F. H., Susilawati, A., & Arief, D. S. 2017. Analisa Performance Mesin Screw Press Menggunakan Metoda Overall Equipment Effectiveness (Studi Kasus: PTPN V SEI Pagar) (Doctoral dissertation, Riau University).

Hasballah, T., & Siahaan, E. W. (2018). Pengaruh tekanan screw press pada proses pengepresan daging buah menjadi crude palm oil. Jurnal Darma Agung. Vol.26. No. 3: hal. 722-729.

Suhaeri. 2017. Analisa Pengendalian Kualitas Produk Jumbo Roll Dengan Menggunakan Metode FTA (Fault Tree Analysis) Dan FMEA (Failure Mode And Effect Analysis) Di PT. Indah Kiat Pulp & Paper, Tbk. Skripsi. Jakarta : Universitas Mercu Buana.

Santoso, R., lahay, I.H, Junus, S., Lapai, Y., 2021. Optimalisasi Perawatan Mesin Press Dengan Metode Failure Mode Effect Analysis (FMEA). Jambura Industrial Review. Vol 1. No 1: hal. 1-6.

Pasaribu, M. I., Ritonga, D. A. A., & Irwan, A. (2021). ANALISIS PERAWATAN (MAINTENANCE) MESIN SCREW PRESS DI PABRIK KELAPA SAWIT DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DI PT. XYZ. JITEKH (Jurnal Ilmiah Teknologi Harapan). Vol. 9. No. 2

:hal. 104-110.

Anthony, Bo, M. 2016. Analisis penyebab kerusakan hot rooler table dengan menggunakan metode failure mode and effect analysis (FMEA). Jurnal INTECH Teknik Industri Universitas Serang Raya. Vol. 4. No. 1: hal.1-8.

Eze, M. N., & Eneh, I. I. (2022). Using Failure Occurrence, Severity, Detection, and Risk Priority Number in Developing FMEA Worksheet in a Brewery for Failure Mitigation. Environmental Sciences, 5(3), 1-9.

Published
2023-02-23
How to Cite
[1]
Sarbeni and A. Saputra, “Identification of Screw Press Machine Damage Using Failure Mode And Effect Analysis Method in PT. Socfinfo Seunagan”, JI, vol. 8, no. 1, pp. 123-127, Feb. 2023.