Evaluation of Occupational Health and Safety at the Sterilizer Station with the HIRARC Method at PT. Beurata Subur Persada

  • Fachrul Razi Universitas Teuku Umar
  • Arie Saputra Prodi Teknik Industri Universitas Teuku Umar

Abstract

PT. Beurata Subur Peusada is a factory engaged in the palm oil processing industry (PMKS). PT. Beurata Subur Persada is in the area of Babah Dua Village, Tadu Raya District, Nagan Raya Regency. Based on the company's historical data during the 2019-2022 period there have been 5 cases of accidents at the PT. Beurata Subur Peusada. The purpose of this research is to condition a significant level of work accident rates at the sterilizer station. The method used is Hazard Identification Risk Assessment and Risk Control (HIRARC). The results of the risk assessment of the PT. The potentially dangerous Beurata Subur Peusada consists of 25% extreme risk, 50% medium risk, and 25% high risk, and 0% low risk. Control measures that can be taken are to provide instructions to workers to work according to company SOPs and always use PPE, conduct training or seminars for workers in which there are recommendations for using PPE and always work according to SOPs and tighten regulations.

Downloads

Download data is not yet available.

Author Biography

Fachrul Razi, Universitas Teuku Umar

Mahasiswa Program Studi Teknik Industri Universitas Teuu Umar

References

C. D. Purnamasari, EVALUASI PENERAPAN KESELAMATAN DAN KESEHATAN KERJA (K3) DENGAN METODE HIRARC PADA PRODUKSI GULA DI PT. MADU BARU PG MADUKISMO, (Universitas Gadjah Mada), 2019.

H. K. N. E. &. A. N. A. Wardani, "Identifikasi Hazard Potential Pada Area Penambangan Dengan Metode JSA," Jurnal Ilmiah Indonesia, vol. 7(6), 2022.

M. A. S. M. F. &. T. M. R. Bary, " Analisis Beban Kerja Pada Proses Produksi Crude Palm Oil (CPO) di PABRIK Minyak Sawit dengan Kapasitas 50 Ton TBS/Jam," Jurnal Teknologi Industri Pertanian, vol. 23(3), 2013.

T. Edwin, R. A. Regia, M. Irfan and Y. Kurniawan, "ANALISIS RESIKO PADA BAGIAN PRODUKSI PABRIK PENGOLAH GETAH KARET MENGGUNAKAN METODE HIRARC (Studi Kasus PT X Kota Padang)," Jurnal Sains dan Teknologi, vol. 18(1), pp. 21-26, 2019.

G. Smarandana, A. Momon and J. Arifin, "PENILAIAN RISIKO K3 PADA PROSES PABRIKASI MENGGUNAKAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL(HIRARC)," Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 7(1), pp. 56-62, 2021.

A. P. T. W. &. P. H. C. Wijaya, "Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia," Jurnal titra, vol. 3(1), pp. 29-34, 2015

I. I. Susiani, "Program keselamatan dan kesehatan kerja sebagai wujud dari kebijakan k3 di PT. Indocement Tunggal Prakarsa, Tbk," 2009.

B. H. Sebastianus, " Manajemen Keselamatan Dan Kesehatan Kerja Sebagai Peranan Pencegahan Kecelakaan Kerja Di Bidang Konstruksi.," 2015.

D. P. Putra, "Penerapan inspeksi keselamatan dan kesehatan kerja sebagai upaya pencegahan kecelakaan kerja," HIGEIA (Journal of Public Health Research and Development), vol. 1(3), pp. 73-83, 2017.

P. H. J. &. S. S. Giananta, "Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra," Jurnal Valtech, vol. 3(2), pp. 106-110, 2020.

D. Purnama, "Analisa Penerapan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control) dan HAZOPS (Hazard and Operability Study) dalam Kegiatan Identifikasi Potensi Bahaya dan Risiko Pada Proses Unloading Unit di PT. Toyota Astra Motor," Jurnal Pasti, vol. 9 (3) , pp. 311-319., 2015.

T. U. a. A. Z. A. Busyaeri, "A. Busyaeri, T. Udin and A. Zaenudin, “Pengaruh penggunaan video pembelajaran terhadap peningkatan hasil belajar mapel IPA di MIN Kroya Cirebon," Ibtida: Jurnal Pendidikan Guru MI, vol. 3(1), 2016.

O. Oktorima, "Penilaian Hasil Belajar Anak Berkebutuhan Khusus di Sekolah Penyelenggara Inklusif SD N 01 Limau Manis (Penelitian Studi Kasus)," J. Penelitian Pendidikan Khusus, vol. 4(3), 2017.

L. D. W. M. R. &. G. N. A. Fathimahhayati, "Analisis Risiko K3 Dengan Metode Hirarc Pada Industri Tahu Dan Tempe Kelurahan Selili, Samarinda," Jurnal Rekavasi, vol. 7(1), pp. 62-70., 2019.

O. 18001, "Occupational and Safety Management System –Guideline for The Implementation of OHSAS 18001," 2007.

S. N. A. &. R. A. Supriyadi, "Identifikasi Bahaya dan Penilaian Risiko K3 pada Tindakan Perawatan & Perbaikan Menggunakan Metode HIRARC (Hazard Identification and Risk Assesment Risk Control) pada PT. X.," in Prosiding Seminar Nasional Riset Terapan| SENASSET , 2015.

D. S. &. R. D. Urrohmah, "Identifikasi Bahaya Dengan Metode Hazard Identification, Risk Assessment and Risk Control (Hirarc) Dalam Upaya Memperkecil Risiko Kecelakaan Kerja Di Pt. Pal Indonesia," Jurnal Pendidikan Teknik Mesin, vol. 8(1), 2019.

Published
2023-02-19
How to Cite
[1]
F. Razi and A. Saputra, “Evaluation of Occupational Health and Safety at the Sterilizer Station with the HIRARC Method at PT. Beurata Subur Persada”, JI, vol. 8, no. 1, pp. 116-122, Feb. 2023.