IOT Application on Water Intake Pump

Ahdiat L Siregar; Hendra Saputra; Azhar Basyir Rantawi; Istianto Budhi Raharja; Widya Enzely

doi:10.31572/inotera.Vol10.Iss1.2025.ID442

Ahdiat L Siregar Mill Processing Study Program, Politeknik Kelapa Sawit Citra Widya Edukasi
Hendra Saputra Mill Processing Study Program, Politeknik Kelapa Sawit Citra Widya Edukasi
Azhar Basyir Rantawi Mill Processing Study Program, Politeknik Kelapa Sawit Citra Widya Edukasi
Istianto Budhi Raharja Technology Institute of PLN
Widya Enzely Student of Plantation Product Processing Study Program, Politeknik Kelapa Sawit Citra Widya Edukasi

DOI: https://doi.org/10.31572/inotera.Vol10.Iss1.2025.ID442

Keywords: Application, Palm oil mill, Internet of Things, Water Intake, Pump

Abstract

The water needed by the Palm Oil Mill (POM) is obtained from the river that is flowed to the mill using a pump manually by the water treatment station operator, which has the potential to cause human error. This research was conducted at POM PT. Kalimantan Sawit Abadi, Citra Borneo Indah Group on March 1 - March 31, 2024. The purpose of this research is to create a series of water intake pump automation based on the Internet of Things and analyze the impact of the pump operation and workers. From this research, IoT applications are produced for water intake pump operations that can be operated and monitored using Blynk remotely and anywhere. From the use of this IoT application, workers can be allocated to other jobs so that it is more effective than just operating a water intake pump.

Downloads

Download data is not yet available.

References

E. Sari, “Konsumsi Air Dan Potensi Penghematan Pada Proses Produksi CPO PT. Perkebunan Nusantara V Pabrik CPO Sei Galuh.” [Online]. Available: http://www.kpbptpn.co.id.

J. Teknologi and M. Uda, “Perencanaan Mesin Fluida (Pompa Centrifugal) Untuk Mengalirkan Minyak Kelapa Sawit Dari Tangki Harian ke Storage Tank Dengan Kapasitas 5,28 Ton/Jam,” 2022.

R. Priyatna and A. Andang, “Model Sistem Otomatis Water Treatment Plant Menggunakan PLC Berbasis Wireless,” 2021.

D. Irvin, S. Bach, O. Saziati, and J. Teknik, “Rancang Bangun Sistem Monitoring Kualitas Air Boiler Berbasis IoT Pada Pabrik Kelapa Sawit di PT. Sasmita Bumi Wijaya,” 2024. [Online]. Available: https://jurnal.untan.ac.id/index.php/jtinUNTAN/issue/view/2162-26-

A. Mahfud and M. S. Ariansyah, “Prototype Monitoring Vibrasi, Temperatur dan Jam Kerja pada Elektromotor Berbasis IoT,” Jurnal Citra Widya Edukasi, vol. 15, no. 3, 2023.

R. Putra Pratama, U. Muhammadiyah Riau, and J. Tambusai Ujung, “Implementasi Logika Fis Tsukamoto Untuk Menentukan Takaran Zat Kimia Pada Proses Pengolahan Air di Pabrik Kelapa Sawit,” JOISIE Journal Of Information System And Informatics Engineering, vol. 5, no. Desember, pp. 90–97, 2021.

H. Sastrohartono and R. A. Renjani, “Studi Pemanfaatan Water Rejected Reverse Osmosis untuk Kebutuhan Air Domestik dan Sebagai Boiler Feed Water,” pp. 195–199, 2014.

G. Hergika, “Perancangan Internet of Things (IoT) Sebagai Kontrol Infrastruktur dan Peralatan Toll Pada PT. Astra Infratol Road,” vol. 8, no. 2, 2021, [Online]. Available: https://www.esp8266.com/viewtopic.php?p=68657

F. Ilhami and P. Sokibi, “Perancangan dan Implementasi Prototype Kontrol Peralatan Elektronik Berbasis Internet of Things Menggunakan NodeMCU,” 2019.

A. Nur Syawaluddin, “Studi Kasus di FTI pada Prodi Rekayasa Sistem Komputer,” vol. 6, no. 2, 2019, [Online]. Available: www.hobbytronics.co.uk

A. Herlina, . S., and M. F. Rohman, “Rancang Bangun Sistem Kendali Lampu dan Kanopi Otomatis Menggunakan NodeMCU ESP8266 Berbasis IOT,” Jurnal Sains dan Teknologi (JSIT), vol. 4, no. 1, pp. 8–10, Jan. 2024, doi: 10.47233/jsit.v4i1.1422.

M. Habib Al Hudry, F. Fathoni, Y. Ulkhaq, P. Tio Rifki Wijaya, and M. H. Arkan, “Perancangan Sistem Pendeteksi dan Monitoring Ketinggian Air Berbasis IoT Menggunakan NodeMCU ESP8266,” vol. 2, no. 3, pp. 87–93, 2023, doi: 10.55123.

B. Satria, “IoT Monitoring Suhu dan Kelembaban Udara dengan Node MCU ESP8266,” sudo Jurnal Teknik Informatika, vol. 1, no. 3, pp. 136–144, Aug. 2022, doi: 10.56211/sudo.v1i3.95.

H. P. Ramadhan, C. Kartiko, and A. Prasetiadi, “Monitoring Kualitas Air Tambak Udang Menggunakan NodeMCU, Firebase, dan Flutter,” Jurnal Teknik Informatika dan Sistem Informasi, vol. 6, no. 1, Apr. 2020, doi: 10.28932/jutisi.v6i1.2365.

A. Budiyanto, G. B. Pramudita, S. Adinandra, P. Studi, and T. Elektro, “Kontrol Relay dan Kecepatan Kipas Angin Direct Current (DC) dengan Sensor Suhu LM35 Berbasis Internet of Things (IoT),” 2020.

A. Shafitri and A. Mashuri, “Perancangan Pengendali Lampu Kantor Berbasis Internet of Things,” Prosisko, vol. 9, no. 1, 2022.

M. S. Pandang, N. Nachrowie, and R. D. J. K. Sari, “Prototype Kendali Arus dan Tegangan Menggunakan Internet of Things (IoT),” Blend Sains Jurnal Teknik, vol. 2, no. 2, pp. 191– 197, Oct. 2023, doi: 10.56211/blendsains.v2i2.351.

M. Wijayanti, “Prototype Smart Home Dengan NodeMCU ESP8266 With Berbasis IoT,”

JUIT, vol. 1, no. 2, pp. 101–107, 2022.

O. : Septian and P. Aji, “Infusing Monitoring Tools Using Web Online Based ESP8266 With Arduino IDE Programming,” 2018.

M. Rizki Angraini and R. Muharni, “Terbit online pada laman web jurnal Analisis Kebutuhan Debit Air Di Gedung C RSUD Kota Bukittinggi,” JURNAL Teknik Mesin, vol. 14, no. 2, pp. 94–98, 2021, [Online]. Available: http://ejournal2.pnp.ac.id/index.php/jtm

I. J. Karassik, Pump handbook. McGraw-Hill, 2001.

D. Saputra and V. Arinal, “Perancangan Home Automation Dalam Mengontrol Lampu dan Kipas Menggunakan Blynk Berbasis NodeMCU,” Sosial dan Teknologi (SOSTECH), vol. 1, 2021.