Hazard Identification and Risk Management for Occupational Safety and Health at PT. PLN (Persero) Transmisi dan Gardu Induk Meulaboh

Iing Pamungkas; Abdiel Khaleil Akmal; Heri Tri Irawan; Azhar

doi:10.31572/inotera.Vol10.Iss1.2025.ID431

Iing Pamungkas Program Studi Teknik Industri, Fakultas Teknik, Universitas Teuku Umar
Abdiel Khaleil Akmal Industrial Engineering Department, Engineering Faculty, Universitas Teuku Umar
Heri Tri Irawan Industrial Engineering Department, Engineering Faculty, Universitas Teuku Umar
Azhar Mechanical Engineering Department, Engineering Faculty, Universitas Teuku Umar

DOI: https://doi.org/10.31572/inotera.Vol10.Iss1.2025.ID431

Keywords: Hazard, Risk, OSH, HIRADC

Abstract

This research aims to identify the sources of Occupational Safety and Health (OSH) hazards at PT. PLN (Persero) Transmisi dan Gardu Induk Meulaboh and to control the risks of OSH hazards at PT. PLN (Persero) Transmisi dan Gardu Induk Meulaboh. Focusing on power transmission, PT. PLN (Persero) Transmisi dan Gardu Induk Meulaboh is always committed to improving the quality and continuity of service to customers. However, considering the high inherent risks in electrical activities, the company realizes the importance of prioritizing safety and health at work (OSH) as an integral part of its operations. Given the high risks associated with electrical activities, this company needs to proactively identify and manage potential hazards that could threaten the safety of workers. Hazard identification, risk assessment, and determining control (HIRADC) are used to identify potential hazards, assess risks, and determine appropriate control measures for those hazards. HIRADC consists of three main stages, namely hazard identification, risk assessment, and hazard control. The results of the hazard and risk identification show that work activities at PT. PLN (Persero) Transmisi dan Gardu Induk Meulaboh contain a number of significant potential hazards including the risk of electric shock, exposure to hazardous chemicals, high noise levels, the potential to be struck by equipment, the risk of leaks, and the danger of fire. The consequences of exposure to these hazards can vary, ranging from minor injuries to fatal injuries. Some control measures that can be taken include the use of appropriate Personal Protective Equipment (PPE), the installation of hazard warning signs, and the implementation of safe work procedures.

Downloads

Download data is not yet available.

References

Parningotan Malau, Corporate Crime Accidents at Work. Zifatama Jawara, 2022.

Heri Tri Irawan, Iing Pamungkas, Hasnita Hasnita, and Teuku Soleh Fauza, “Risk Identification and Mitigation in Construction Projects Using the House of Risk Method: A Case Study,” Jurnal Optimalisasi, vol. 10, no. 1, pp. 80–80, Apr. 2024.

L. Yasmin, R. N. Faisal, and E. W. Dewi, “Analysis of the Implementation of Hygiene, Sanitation, and Occupational Safety in Tour and Travel Companies in Cirebon City,” Journal of Sharia Tourism and Hospitality, vol. 1, no. 2, pp. 192–202, Oct. 2023.

I. Pamungkas, Heri Tri Irawan, Mahmud Basuki, Arrazy Elba Ridha, Adib, Rizki Agam Syahputra, and Fajar Okta Widarta, Methods of Analysis of Production Machine Failure Risk in Indonesia: Literature Review. Jurnal Industri dan Inovasi (INVASI), vol. 1, no. 1, pp. 01-11, Sep. 2023.

Iing Pamungkas, Heri Tri Irawan, and T.M Azis Pandria, “Implementation of Preventive Maintenance to Increase the Reliability of Critical Boiler Components in PLTU,” VOCATECH Vocational Education and Technology Journal, vol. 2, no. 2, pp. 73–78, Apr. 2021.

I. Pamungkas, and Heri Tri Irawan, Critical Boiler Component Damage Reduction Risk Strategy in the Power Generation Industry. Jurnal Optimalisasi, vol. 6, no. 1, pp. 86-95, Apr. 2020.

None Anton Nugroho and C. Kirana, “Employee Wage Scheme in Construction Companies Based on Occupational Safety Risks,” Jurnal Teknologi dan Manajemen Industri Terapan, vol. 3, no. I, pp. 67–77, Mar. 2024.

Iing Pamungkas, Heri Tri Irawan, Fitriadi, and A. Saputra, “Risk and reliability analysis on critical components of boiler in steam power plant,” IOP conference series, vol. 1003, no. 1, pp. 012048–012048, Dec. 2020.

Iing Pamungkas, Heri Tri Irawan, Lian Arkanullah, Muhammad Dirhamsyah, and M. Iqbal, “Determining the Level of Risk in the Traditional Salt Production Process in Ie Leubeu Village, Pidie Regency,” Jurnal Optimalisasi, vol. 5, no. 2, pp. 107–120, Dec. 2019.

Seng Hansen, “Identification Of Hazard Types And Hazard Assessment Parameters In Construction Work,” PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, vol. 11, no. 1, pp. 94–102, May 2022.

T. Sukwika and H. D. Pranata, “Occupational Safety and Health Analysis in the Freight Forwarder Sector Using the HIRADC Method,” Jurnal Teknik, vol. 20, no. 1, pp. 1–13, Jun. 2022.

A. Wildan, T. Sukwika, and K. Kholil, “Analysis of Potential Hazards in the Oncology Tablet Manufacturing Process Using the HIRA Method,” Journal of Applied Management Research, vol. 2, no. 1, pp. 53–65, Jul. 2022.

T. Ihsan, S. A. Hamidi, and F. A. Putri, “Risk Assessment Using the HIRADC Method in the Construction Work of the West Sumatra Cultural Building,” Jurnal Civronlit Unbari, vol. 5, no. 2, p. 67, Oct. 2020.

Mega Raudhatin Jannah, Saifoe El Unas, and M. Hamzah Hasyim, “Occupational Safety and Health (K3) Risk Analysis Using the Hiradc Approach and Job Safety Analysis Method in a Case Study of the X Tower Development Project in Jakarta,” Jurnal Mahasiswa Jurusan Teknik Sipil Universitas Brawijaya, vol. 1, no. 2, p. 138184, Apr. 2017.

Mohammad Ikrar Pramadi, Hadi Suprapto, and Ria Rahma Yanti, “Prevention Of Workplace Accidents With The Hiradc Method In Fabrication And Machinery Companies,” JENIUS, vol. 1, no. 2, pp. 98–108, Nov. 2020.

M. R. Lazuardi, T. Sukwika, and K. Kholil, “Occupational Health and Safety Risk Management Analysis Using the HIRADC Method in the Electrical Assembly Department,” Journal of Applied Management Research, vol. 2, no. 1, pp. 11–20, Jul. 2022.

U. Rahardja, “Risk Assessment, Risk Identification, and Control in The Process Of Steel Smelting Using the Hiradc Method,” APTISI Transactions on Management (ATM), vol. 7, no. 3, pp. 261–272, Sep. 2023.

Achmad Azhar Cholil, S. Santoso, T Riza Syahrial, E. C. Sinulingga, and Risa Hasanah Nasution, “Implementation Of The Hiradc Method As An Efforts To Prevent The Risk Of Workplace Accidents In The Operations Division Of Gas Power Plants,” vol. 20, no. 2, pp. 41–64, Aug. 2021.

R. Soesilo, “JSA and HIRADC Analysis of Mold Replacement Process on Inject Stretch Blow Machine,” International Journal of Engineering, Science and Information Technology, vol. 3, no. 1, pp. 9–14, Jan. 2023.

E. Prasetyo, D. L. Caesar, and A. H. Husna, “Improving Work Productivity By Implementing K3 Principles In The Work Environment,” Jurnal Pengabdian Kesehatan, Mar. 2018.

A. Redana and T. Oktiarso, “Identification Of Potential Hazards Using The Hazard Identification Risk Assessment And Risk Control (HIRARC) Method In The Household Industry Tahu 151a,” Sainsbertek Jurnal Ilmiah Sains & Teknologi, vol. 2, no. 2, pp. 42–52, Mar. 2022.

Misbakhul Munir, “Occupational Safety Analysis as an Effort to Control Work Accident Risks,” Jurnal Universal Technic, vol. 2, no. 2, pp. 15–26, Aug. 2023.

Nonzha Anita and Etika Sabariah, “The Influence of Key Performance Indicators (KPIs) and Work Environment on Employee Performance at Tazbiya Brands,” Jurnal Riset dan Inovasi Manajemen, vol. 1, no. 4, pp. 140–151, Oct. 2023.

H. Purwoko, Kamsariaty, Rubadi, J. C. Saksana, and J. P. Soehaditama, “Key Performance Indicator: Concept, Implementation to Performance Management,” East Asian Journal of Multidisciplinary Research, vol. 2, no. 8, pp. 3261–3268, Aug. 2023.

R. Nabawi, “The Influence of Work Environment, Job Satisfaction and Workload on Employee Performance,” Maneggio: Jurnal Ilmiah Magister Manajemen, vol. 2, no. 2, pp. 170–183, Mar. 2020.

A. K. Akmal, I. Pamungkas, and H. tri Irawan, “Risk Identification on Screw Press Machines Using the Failure Mode and Effect Analysis (FMEA) Method on CV.” Rezeki Bersama,” Jurnal Inotera, vol. 9, no. 2, pp. 475–481, Nov. 2024.

H. T. Irawan, Iing Pamungkas, Abdiel Khaleil Akmal, T. M. Azis Pandria, Sofiyanurriyanti, and Hasnita, Identification of Causes of Pump Machine Damage in PDAM Water Distribution System Using FMEA and LTA. Jurnal Optimalisasi, vol. 10, no. 2, pp. 260-268, Okt. 2024.

A. K. Akmal, Iing Pamungkas, and Heri, “Identification of Damage in Press Stations Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Beurata Subur Persada,” Jurnal Inotera, vol. 9, no. 1, pp. 204–211, Jun. 2024.