Riplle Mill Machine Damage Analysis Using the FMEA Method at the PT Argo Sinergi Nusantara Palm Oil Factory
Abstract
PT Agro Sinergi Nusantara (ASN), one of the industries engaged in the Palm Oil Mill (PKS) industry, is located in Teunom, Aceh Jaya Regency. The Ripple Mill machine is one of the important machines used in Palm Head Mills which functions as a separator or splitter of kernel kernels and palm shells by utilizing centrifugal force to produce Palm Kernel Oil. From the initial analysis, it is known that the use of Ripple Mill machines in the industry today often experiences donwtime or damage. The purpose of this study is to analyze the damage of the Ripple Mill machine at PT ASN's Palm Oil Mill using the Failure Mode and Effects Analysis (FMEA) method and Fishbone diagram. The results of the study obtained damage to the Ripple Mill machine in the identification of 5 (five) malfunctions or failure modes that occurred. using the FMEA method, it is known that the most dominant Ripple Mill machine failure mode occurs is the fracture of rotor bar components due to the entry of hard objects with the Risk Priority Number (RPN) which is 384 and using the fishbone diagram method, it is known that there are (four) influencing factors, namely human, machine, environmental and method factors.
Downloads
References
R. T. S. Nandiroh, Hartanto, and H. Munawir, “Perencanaan Pemeliharaan Mesin Pompa Gilingan Saus dengan Metode Markov Chain Untuk Minimasi Biaya Pemeliharaan,” Universitas Muhammadiyah Surakarta, 2014.
B. A. Zardi and Renilaili, “Analisis keselamatan kerja menggunakan metode hazard and operability,” Bina Darma Conf. Eng. Sci., pp. 155–162, 2022.
D. M. Putro and Q. Sholihah, “Analisis Keandalan (Reliability) Pada Mesin Digester (Studi Kasus : Pt. Smart Tbk Batu Ampar Mill Kotabaru),” Sci. J. Mech. Eng. Kinemat., vol. 4, no. 1, pp. 67–76, 2019, doi: 10.20527/sjmekinematika.v4i1.53.
O. Hikmawan, M. Naufa, and B. M. Indriani, “Pengaruh Jarak Rotor Terhadap Efisiensi Pemecahan Biji pada Stasiun Ripple Mill Di Pabrik Kelapa Sawit,” no. ripple mill, pp. 14–21, 2014.
Jayarullah and Rita Hartati, “Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In,” J. Inotera, vol. 8, no. 1, pp. 92–98, 2023, doi: 10.31572/inotera.vol8.iss1.2023.id219.
K. Siregar and D. H. Rizkiansyah, “Analisis Efektivitas Mesin Ripple Mill Menggunakan Metode Overall Equipment Effectiveness (OEE),” Talent. Conf. Ser. Energy Eng., vol. 5, no. 2, pp. 0–7, 2022, doi: 10.32734/ee.v5i2.1556.
A. Saputra et al., “Analisis Risiko Kerusakan Mesin ( Downtime ) Ripple Mill Stasiun Kernel (Studi Kasus PT. Ujong Neubok Dalam),” SITEKIN J. Sains, Teknol. dan Ind., vol. 19, no. 2, pp. 241–247, 2022.
E. Krisnaningsih, P. Gautama, and M. F. K. Syams, “Usulan Perbaikan Kualitas Dengan Menggunakan Metode Fta Dan Fmea,” J. InTent, vol. 4, no. 1, pp. 41–54, 2021.
A. Pratama, “Analisis Produk Cacat Brake Wheel (PT. Panasonic) dengan Menggunakan Metode Seventools di CV. Sumber Baja Perkasa,” Integr. Lab J., vol. 5, no. 2, 2017.
Meutia, B. S., and D. Dirahayu, “Analisis Pengendalian Mutu Produk Koran Dalam Upaya mengendalikan Tingkat Kerusakan Produk,” Ind. Eng. J., vol. 2, no. 1, 2018.
