Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In

  • Jayarullah Universitas Teuku Umar
  • Rita Hartati Universitas Teuku Umar
Keywords: FMEA, Ripple Mill, Risk, Maintenance, PT. Ujong Neubok Dalam

Abstract

Palm oil is a plantation crop of high economic value and is one of the crops producing vegetable oil and various other derivative products. Palm oil processing is one of the factors that determine the business productivity of a palm oil mill. The smoothness of the production process is greatly influenced by the reliability of the machines used. The Ripple Mill machine is a meisn that serves as a seed breaker to separate the shell from the palm kernel. This study aims to identify failures that occur in the Ripple Mill engine. This research uses the Failure Mode and Effect Analysis (FMEA) method, which is to find out and observe whether the failure rate can be analyzed or measured so as to minimize the damage / failure. Based on the results of the study, there are 5 failure risks that occur in the Ripple Mill engine with the component that has the highest value is the V-Belt, which is 294 RPN,  while the one with the lowest value is the Ripple Plate Pipe with a Risk Priority Number value of 60 RPN.

Downloads

Download data is not yet available.

References

Hikmawan, O., Naufa, M., & Indriani, B. M. (2021). PENGARUH JARAK ROTOR TERHADAP EFISIENSI PEMECAHAN BIJI PADA STASIUN RIPPLE MILL DI PABRIK KELAPA SAWIT. Jurnal Teknik dan Teknologi, 16(31), 14-21.

Husman, Sugianto, Saputra Deni. 2016, “Rancang Bangun Mesin Penghancur Buah Kelapa Sawit

Kapasitas 50 kg/jam”. Jurnal Manutech. Vol. 7 (2): 16-54.

Irfan, M., Ali, S., Zulfan, Z., & Ansar, K. (2022). ANALISA KINERJA MESIN RIPPLE MILL DENGAN BEBAN 30 TON/JAM. STUDY KASUS DI PT. UND. Jurnal Mahasiswa Mesin, 1(1), 34-39.

Hamdi Muhammad Ihsan Dan Azizi Abdul. 2017, “Analisis Nilai Overall Equipment Effectiveness

(OEE) Pada Mesin Ripple Mill”. Jurnal Teknik Industri Vol. 3 (1).

Susanti Meri. 2018, “Analisis Perawatan (Maintenance) Mesin Ripple Mill pada PT. Gersindo

Minang Plantation Palm Oil Mill (GMP) – Pom Tanjung Pangkal Pasaman Barat”.

Denur, D., Hakim, L., Hasan, I., & Rahmad, S. (2017). Penerapan Reliability Centered Maintenance (RCM) pada Mesin Ripple Mill. JISI: Jurnal Integrasi Sistem Industri, 4(1), 27-34.

Supoyo, F. R., Darajatun, R. A., & Wahyudin, W. (2023). Analisis Pengendalian Kualitas Untuk Mengurangi Defect Parking Brake dengan Metode FMEA di PT XYZ. Jurnal Serambi Engineering, 8(1).

Rohmah, W., Wahyudin, W., Vindari, Z. I., Azzahra, A. G., Khan, S. P., & Ayuningtyas, S. M. (2023). Analisis Risiko Supply Chain pada Material Part Joint Brake Rod di PT XYZ. Jurnal Serambi Engineering, 8(1).

R. I. Yaqin, Z. Z. Zamri, J. P. Siahaan, Y. E. Priharanto, M. S. Alirejo, and M. L. Umar, “Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk: Studi Kasus di KM. Sidomulyo,” J. Rekayasa Sist. Ind., vol. 9, no. 3, pp. 189–200, Oct. 2020, doi: 10.26593/jrsi.v9i3.4075.189-200.

D. A. Kifta and T. Munzir, “Analisis Defect Rate Pengelasan Dan Penanggulangannya Dengan Metode Six Sigma Dan Fmea Di PT. Profab Indonesia Defect Rate Analysis Of Welding And Its Control Using Six Sigma And FMEA Methods In PT. Profab Indonesia,” DIMENSI, vol. 7, no. 1, pp. 162–174, 2018.

D. Kartika, R. Kuncoro, P. Ayu, N. Pratiwi, and Y. Sukmono, “Pengendalian Risiko Proses Produksi Crude Palm Oil Dengan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA),” J. Ilm. Tek. Ind., vol. 1, pp. 01–06, 2018.

Y. M. Wang, K. S. Chin, G. K. K. Poon, and J. B. Yang, “Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean,” Expert Syst. Appl., vol. 36, no. 2 PART 1, pp. 1195–1207, 2009, doi: 10.1016/j.eswa.2007.11.028.

Published
2023-02-15
How to Cite
[1]
Jayarullah and Rita Hartati, “Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In”, JI, vol. 8, no. 1, pp. 92-98, Feb. 2023.