Identification of Screw Press Machine Malfunctions in PT. Ujong Neubok Dalam (UND) Using Failure Mode and Effect Analysis (FMEA)

  • Havid Maulana Universitas teuku umar
  • T.M Aziz Pandria Universitas Teuku Umar
Keywords: Screw Press, Maintenance, Failure Mode and Effect Analysis, PT. Ujong Neubok Dalam (UND)

Abstract

PT. Ujong Neubok Dalam (UND) is a company engaged in the business of plantation and processing of palm oil, the processing of palm oil into palm oil is carried out using a screw press. Screw press is a very important machine in processing palm oil into Crude Palm Oil (CPO), if the screw press has problems then the production process does not run smoothly. This study was conducted to identify damage and repairs to the working tools of the Screw Press machine. In the study using the Failure Mode Effect and Analysis (FMEA) method, which aims to identify risks in advance to take preventive measures. Based on the results of the study, there are 6 risks of failure in the Screw Press machine, with the component that has the highest result, namely the Screw of 108 and the component that has the smallest value, namely the Protection Hut, which is 12. From these results, it can be concluded that the Screw component is a priority or priority in making improvements.

Downloads

Download data is not yet available.

References

Tarigan, E. E. (2021). Analis Dinansial Pembibitan Kelapa Sawit Dan Produsen Benih Di Profinsi Sumatera Utara. ARISAINS. Jurnal Ilmiah Magister Agribisnis, 23-30.

M. Rizki, A. Wenda, … F. P.-2021 I., and undefined 2021, “Comparison of Four Time Series Forecasting Methods for Coal Material Supplies: Case Study of a Power Plant in Indonesia,” ieeexplore.ieee.org, Accessed: Jun. 05, 2022. [Online]. Available: https://ieeexplore.ieee.org/abstract/document/9493522/.

S. Nandiroh, R. T. Hartanto, and H. Munawir, “Perencanaan Pemeliharaan Mesin Pompa Gilingan Saus Dengan Metode Markov Chain Untuk Minimasi Biaya Pemeliharaan ( Studi Kasus : PT. Lombok Gandaria, Unit Maintenance),”2015.

Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), 145-154.

Ir. T. Hasnallah, Enzo W.,B., Siahan, 2018, Pengaruh Tekanan Screw Press pada proses pengepresan Daging Buah menjadi Crude Palm Oil, JURNAL DARMA AGUNG, 1, XXVI dan 722-729.

Fauzul.,H.,S, Anita., S., Dodi., S.,A, 2017, Analisa Performance Mesin Screww Press menggunakan metoda Overall Equipment Effectivieness, Studi kasus Fakultas Teknik, UNIV. Riau, dan Riau.

Mangoensoekarjo, Soepadiyo dan Haryono Semangun. 2003. Manajemen Agrobisnis Kelapa Sawit. Gadjah Mada University Press. Vol. XXVI. No. 1, hal: 722-728.

Anthony, Bo, M. 2016. Analisis penyebab kerusakan hot rooler table dengan menggunakan metode failure mode and effect analysis (FMEA). Jurnal INTECH Teknik Industri Universitas Serang Raya. Vol. 4. No. 1: hal.1-8.

Suhaeri. 2017. Analisa Pengendalian Kualitas Produk Jumbo Roll Dengan Menggunakan Metode FTA (Fault Tree Analysis) Dan FMEA (Failure Mode And Effect Analysis) Di PT. Indah Kiat Pulp & Paper, Tbk. Skripsi. Jakarta : Universitas Mercu Buana.

Dyadem. 2009. Guidelines for Failure Mode and Effects Analysisfor Automotive, Aerospace and General Manufacturing Industries. New York Washington D.C: CRC Press.

Khrisdamara, B., & Andesta, D. (2022). Analisis Penyebab Kerusakan Head Truck-B44 Menggunakan Metode FMEA dan FTA (Studi Kasus: PT. Bima, Site Pelabuhan Berlian). Jurnal Serambi Engineering, 7(3).

Anastasya, A., & Yuamita, F. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi dan Manajemen Industri Terapan, 1(I), 15-21.

D. Kartika, R. Kuncoro, P. Ayu, N. Pratiwi, and Y. Sukmono, “Pengendalian Risiko Proses Produksi Crude Palm Oil Dengan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA),” J. Ilm. Tek. Ind., vol. 1, pp. 01–06, 2018.

Eze, M. N., & Eneh, I. I. (2022). Using Failure Occurrence, Severity, Detection, and Risk Priority Number in Developing FMEA Worksheet in a Brewery for Failure Mitigation. Environmental Sciences, 5(3), 1-9.

D. Diniaty and R. Susanto, “Analisis Total Produktive Maintenance (TPM) Pada Stasiun Kernel Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) Di Pt. Surya Agrolika Reksa,” 2017.

Published
2023-02-03
How to Cite
[1]
H. Maulana and T.M Aziz Pandria, “Identification of Screw Press Machine Malfunctions in PT. Ujong Neubok Dalam (UND) Using Failure Mode and Effect Analysis (FMEA)”, JI, vol. 8, no. 1, pp. 53-58, Feb. 2023.