Analysis of Potential Hazards in the Palm Oil Processing Process at PT. Karya Tanah Subur Using Job Safety Analysis (JSA)

  • Muhammad David Teknik Industri, Universitas Teuku Umar
  • Heri Tri Irawan Universitas Teuku Umar
Keywords: Risk Analysis, Job Safety Analysis, Risk Assessment, Risk Control, Oil Palm

Abstract

PT. Karya Tanah Subur (KTS) is a palm oil processing industry located on Jalan Gemmpang-Tutut, Padang Sikabu Village, Kawai XVI District, West Aceh District. Based on the results of observations and interviews conducted with the person in charge of the factory, it is known that there are potential hazards that occur during the production process. The potential hazards that occur cannot be separated from various risks in the work environment, as well as negligence and also non-compliance by workers in using PPE. The purpose of this research is to identify the potential hazards at the Loading Ramp, Sterilizer, and Thresher stations and then assess the risk level of these potential hazards and determine control measures for these risks. The method used in this research is Job Safety Analysis (JSA). The results of the analysis revealed that the potential hazards in the 3 areas studied were the Ramp Loading, Sterilizer, and Thresher stations. The potential hazards found in the Ramp Loading area were being pinned by the tailgate of the FFB transport truck, being crushed and punctured by FFB thorns, falling into a pile of FFB, being stabbed by a gancu. . Potential hazards at the Sterilizer Station include exposure to hot steam, electric shock, heat at the end of the lorry, being injured by capstand ropes and slipping due to slippery floors. The potential hazards at the Thresher station include being exposed to the heat of the lorry when it is unable to attach the rope that holds the crane, falling from the workplace, being crushed by fruit that has been boiled in heat. The highest potential hazards are at the Sterilizer station, where workers' hands are injured by capstand ropes and the slippery floor causes workers to slip, and at Thersher stations, where boiled fruit is crushed. Control efforts that can be proposed are to hold internal outreach to company workers which discuss risks in the workplace as well as discussions about occupational health and safety so that workers always use complete PPE in the workplace.

Downloads

Download data is not yet available.

References

D. &. W. Widyaningtyas, "Analisis pangsa pasar dan daya saing CPO Indonesia di Uni Eropa," Jurnal Manajemen Dayasaing, vol. 18(2), pp. 138-145, 2017.

R. &. P. R. Amni, "Analisa Potensi Bahaya dengan Menggunakan Metode Job Safety Analysis (JSA) pada Proses Pengolahan Kelapa Sawit di PKS Raambutan PT. Perkebunan Nusantara III," Seminar dan Konferensi Nasional IDEC, 2021.

R. I. F. M. &. P. H. Nirtha, "Analisis pengaruh penerapan keselamatan dan kesehatan kerja (K3) terhadap kinerja karyawan di perkebunan kelapa sawit PT. Hasnur Citra Terpadu," Jukung (Jurnal Teknik Lingkungan), vol. 5(1), 2019.

N. &. A. G. Nurkholis, " Pengendalian Bahaya Kerja dengan Metode Job Safety Analysis pada Penerimaan Afval Lokal Bagian Warehouse di PT. ST," Teknika: Engineering and Sains Journal, vol. 1(1), pp. 11-16, 2017.

A. S. H. L. &. M. A. S. Al Bantani, "Identifikasi Potensi Bahaya Dengan Menggunakan Metode Job Safety Analysis (JSA)(Studi Kasus di PT XYZ)," Jurnal Teknik Industri Untirta, vol. 3(2), 2015.

J. K. P. A. &. W. R. Bawang, "Analisis Potensi Bahaya Dengan Menggunakan Metode Job Safety Analysis Di Bagian Pengapalan Site Pakal PT. Aneka Tambang Tbk. UBPN Maluku Utara," KESMAS, vol. 7(5), 2019.

P. R. D. I. &. R. R. Martino, "Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (HIRARC) di PT. Charoen Pokphand Indonesia-Semarang," Industrial Engineering Online Journal, vol. 4(2), 2015.

N. A. S. K. &. U. A. Rosdiana, "Identifikasi Risiko Kecelakaan Kerja Pada Area Produksi Proyek Jembatan Dengan Metode Job Safety Analysis (JSA)," Jurnal Teknik Industri Untirta, 2017.

A. &. C. S. P. Pickering, "Risk Matrices: implied accuracy and false assumptions," Journal of Health & Safety Research & Practice, vol. 2(1), pp. 11-18, 2010.

H. &. M. D. Herawati, "Pengaruh kualitas bahan baku dan proses produksi terhadap kualitas produk pada UD. Tahu Rosydi Puspan Maron Probolinggo," UNEJ e-Proceeding, pp. 463-482., 2016.

K. S. N. K. U. P. R. &. P. S. Srianis, "Penerapan metode bermain puzzle geometri untuk meningkatkan perkembangan kognitif anak dalam mengenal bentuk," Jurnal Pendidikan Anak Usia Dini Undiksha, vol. 2(1), 2014.

E. &. S. S. Melani, "Penanganan Anak Hiperaktif Melalui Permainan Edukatif Jigsaw Di Tk Pgri Juwiring Tahun Ajaran 2016/2017 ," Doctoral dissertation, Universitas Muhammadiyah Surakarta, 2017.

V. B. V. &. P. P. Jaiswal, "Risk Assessment in Maintenance Work at Diesel Locomotive Workshop," International journal on emerging technologies, vol. 5(1), 2014.

Published
2023-01-29
How to Cite
[1]
M. David and Heri Tri Irawan, “Analysis of Potential Hazards in the Palm Oil Processing Process at PT. Karya Tanah Subur Using Job Safety Analysis (JSA)”, JI, vol. 8, no. 1, pp. 20-26, Jan. 2023.